Details
System Description:
Hopper Specifications (standard):
- 4-5 Cubic Foot, Powder Coated CRS Hopper
- Adjustable slide gate to dispense product from hopper onto the Vibratory feed pan
- Vibra-drive feed pan with adjustable vibration controller
- Welded, Black Powder Coated CRS Frame
Conveyor Specifications: (Standard specifications listed)
- Conveyor Length: 6 Feet
- Exposed Belt Width: 12 inches
- White Monofilament Cleated Belt
- Cleats 11.5″ wide x 1.5″ High on 6″ Centers
- Angle of Incline: 45 degrees
- V-Belt Guidance System
- Variable Belt Speed (0-30 Ft/Min)
- Formed Polycarbonate cover over Incline Section
- Stainless-Steel Discharge Chute
- 120V/60Hz
Notes: Specification may change, which may affect pricing:
- Hopper capacity may change based on infeed height or other spec changes; customer to advise infeed height required.
- Potentiometer to adjust vibration level; if integrated into APP equipment, this level will be controlled through the touch screen of the counter/scale system
- FDA / White or Steel-it coatings available, customer to specify
- Conveyor length may change based on required discharge height; customer to advise discharge height required.
- Conveyor width may change, 6″, 12″ or wider conveyors available, customer to specify.
- White, green, or black belts available (white is FDA), customer to specify.
- Cleat heights may change, 1″, 1.5″, 2″, 3″ or higher available, customer to specify.
- Angle is adjustable from 40 to 60 degrees, which will affect the discharge height.
- 1/4 HP Motor standard, to be specified based on weight of product and conveyor width/length
- Standard open discharge chute may cause some parts to bounce; closed adjustable lid available
- Voltage available: 110V/60hz or 220V/50Hz, customer to specify
- Castors also available for mobility, customer to specify *Note: Customer specified changes may require updated quote with higher pricing.
Additional Information
UOM | Ea |
---|---|
Lead time | 0 |